This unit is designed to form thin flat sheets with a corrugation design. The product is for aero space but can apply to different designs. For more information, contact AMH to discuss how we may assist you…

This unit is a four post press specifically designed to form various tubes using Polyurethane high durometer yield to compress the tubes into a female die. Contact AMH for more information on this unique unit.

This unit utilizes a unique AMH hydraulic cylinder Model RCP series. The uniqueness of this cylinder allows for the tooling to be mounted directly on the cylinder. The tooling is ideal for expanding small diameters from 5/8″ up to customer specs…

This unit is designed to flange tube or pipe ends. Each unit is designed to fit a specific customers needs in terms of diameter & wall thickness. The forming process takes place in 3-5 seconds. It is a two station unit as shown…

This model is designed to flange tubes on both ends. The length of the tube can be adjusted from 12″ up to 55″. Fixed stations can also be made for any specific length…

Two palm button semi-automatic form cycle, this economically priced unit is ideal for quality production of tubing that requires end finishing. This unit will reduce, expand, bead, flare or flange. Simply utilizing the proper tooling, many shapes take form. This rugged and powerful unit generates up to 30 tons of clamping and forming forces…

The model 3411 GAC is similar to the model 3012 MDE with the exception of the micro dial expanding system. This unit utilizes the gripper clamp only. It can expand, reduce, flare, flange or bead. It is portable, has a 5 hp electric motor with a 3 gpm hydraulic pump. It can operate up to 3000 psi…

This unit is a liquid bellows forming machine of low production output. It is ideal for companies requiring a limited amount of bellows per day. The tooling is economical and easy to setup and disassemble. Depending on the design of the unit, bellows from 1/8” ( 3.1mm ) up to 48” ( 1.2meters ) can be formed at tube starting lengths of 48”…

This particular unit is designed to bead and expand tube ends. It is operated in the Manual or Automatic mode. It forms with segmented tooling. An air cylinder will rotate the segment for a two-stage form. The time to form is approx. 3-5 seconds. A PLC is used in controlling the manual or automatic cycles…

This is a special unit designed to lock tubes onto tube sheets. The forms can be almost air-tight. The process beads the I.D. and flare the outside of the tube on the sheet. Form time is approx. 1/2-1 second…